Table of Contents
Advertisement
Disc Operations
IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabilizer rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
changer mechanism.
– Do not load more than one disc onto
each tray.
Playable discs
This system is able to play :
– All pre-recorded audio CDs
– All finalized audio CDR and audio CDRW
discs
– MP3-CDs (CD-ROMs with MP3 tracks)
Loading discs
(page 3 - P4)
1
Press OPEN/CLOSE 0 1 button to open
disc tray 1.
2
Load a disc with the label side facing up. For
double-sided discs, load the side you want to
play facing up.
3
Press OPEN/CLOSE 0 1 button again to
close the disc tray.
"READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
4
Repeat steps 1~3 for loading discs onto the
disc trays 2~5.
Notes:
– To ensure good system performance, wait until
the disc trays completely read the disc(s) before
proceeding.
– Only one tray can be opened at each time. If
you open the second tray before closing the first
tray, the first tray will automatically close before the
second tray opens.
18
Basic playback controls
Load discs
(page 3 - P4).
To play all discs on the disc trays
Press É Å .
OR
In stop mode, press CD to select a disc tray
to begin, then press É Å .
All the available discs will play once, then stop.
To play the selected disc only
Press one of the 5 DISC DIRECT PLAY
(DISC 1~5) buttons (or CD 1~5 on
remote).
The selected disc will play once, then stop.
To select a desired track
Press í or ë repeatedly until the desired
track is displayed.
During random play (shuffle mode), pressing
í will not affect the current playback.
To search for a particular passage
during playback
Press and hold à or á and release it when
the desired passage is located.
During searching, the volume will be reduced.
For MP3 disc, the volume will be muted.
To replace discs without interrupting
playback
Press OPEN/CLOSE 0 buttons of the
inactive disc trays (refer to "Loading discs").
For example, if currently disc tray 1 is playing,
you can replace the discs on disc tray 2~5.
To interrupt playback
Press É Å .
To resume normal playback, repeat the
above.
To stop playback
Press Ç.
If the system remains in stop mode for 30
minutes, it will switch to Eco Power standby
mode.
Advertisement
Table of Contents
