Table of Contents
Advertisement
• While setting a program;
press STOP/EJECT
but-
ton on the VCR. This function cannot be done by the
remote control.
• After
setting
a program;
(power
must
be on)
First,
press
QUICK
SET
PROGRAM
button.
Then, press STOP/EJECT
button on the VCR. This
function
cannot
be activated
by the remote
control.
• While
recording
is in progress;
press
STOP
/EJECT
button on the VCR. This function
cannot be
activated
by the remote control.
TO CHECK
THE
START/END
TIME
1) Press POWER/TIMER
REC button
so that "[]"
in-
dicator appears.
2) Press QUICK
SET PROGRAM
button
once. Both
the start and end time will appear for 3 seconds each,
and return to the Timer Stand-by
mode.
sP
e
I
I_
FRIcH
.....
_:30RM 6
START TIME
END TIME
"_
_"'
CURRENT TIME
6:Q-/P.
• If there is a power failure or the VCR is unplugged
for more than 3 seconds,
the clock
setting
and all
timer settings
are lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately,
eject the tape
and the VCR power will be turned off. The "[]" in-
dicator will flash.
• If a tape is not inserted or the erase-protection tab is
removed, the "[_" indicator flashes and automatic
timer recording cannot occur. Insert a tape that allows
recording.
• The "IN that is connected to your VCR may be turned
ON or OFF when the VCR is in the timer-record mode.
• When you record a cable channel program with cable
converter box, first set the VCR' s channel to 3 or 4
whichever is the output channel of your cable con-
vener box. Then set your cable converter box to the
channel you want to record and leave on while you
are recording with power on.
USING
THE AUTO
RETURN
BUTTON
After recording the program(s) by using the timer, you
can return to the beginning of the program(s) automat-
ically by pressing the AUTO RETURN button.
=
1 Start Auto Return
When all the timer recordings
are completed
("[_"
flashes), press AUTO RETURN button on the VCR at
once. The VCR will rewind to the beginning of the re-
corded program(s).
NOTE: If there are any remaining
programs,
press
POWER button to turn on, then press AUTO RE-
TURN button. But In this case, if you press any other
button once and press AUTO RETURN button, the
Auto Return will not be done.
USING
THE MA IN MENU
If you select auto return to [AUTO] from the menu,
when all the timer recordings are completed, the VCR
will rewind to the beginning of the recorded program(s)
without pressing AUTO RETURN button.
NOTE: If there are any remaining programs including
Daily & Weekly, this function does not be done.
1
Select the main menu
Press MENU button.
2 Select "VCR SET UP"
Press CHANNEL • or • button repeatedly to point to
"VCR SET UP".
Then, press SELECT button.
3
Select "AUTO RETURN"
[
........
TAPE
SELECT
-T13O
REPEAT
PLAY
Press CHANNEL • or • button
.....
AUTO
RETURN
repeatedly
to point to "AUTO
RETURN".
4 Select "AUTO RETURN" to [AUTO]
ress utton
so that
I ..... ;
[AUTO]
will
appear
next
to
..........._.,,_
"AUTO RETURN".
...........
_,_,_o_
5
To return to TV mode
Press MENU button.
WATCH THE RECORDED
PROGRAM
Press PLAY button.
- 25 -
EN
6A12
Advertisement
Table of Contents
