Table of Contents
Advertisement
-REAR VIEW-
25
26 27
28
[ ]l]t]l]O rlNDI]l]l]rl
--%
,,01"
AUDI
OUT
OUT
IN
0
VIDEO_
c:t3
CH4
29 30 31
32
Tracking function-Press to minimize video 'noise'
20.
(lines or dots on screen) during playback or slow
mode. (only on the VCR)
21.
Press to stabilize the picture in the Still mode when 22.
the picture begins to vibrate vertically.
13. RECORD button-Press to begin manual recording.
OTR button-Press to activate One Touch Record-
ing. (only on the VCR)
14. QUICKSET PROGRAM button-Press to set the
Quick Set Program, or to check it.
START button-Press to enter desired start time dur- 23.
ing Quick Set Program.
END button-Press to enter desired end time during 24.
Quick Set Program.
15. AUTO RETURN button-Press to rewind to the be-
ginning of a timer recording.
25.
16. NUMBER buttons-Press to select desired channels
for viewing or recording. To select channels from 1 to 26.
9, first press "0" button then 1 to 9.
÷100 button-When selecting cable channels which
27.
are more than 100, press this button first, then press
the last two digits. (To select channel 125, first press
"+100" button then press "2" and "5").
28.
17. BLANK SEARCH button-Press to use Blank Search
29.
mode.
18. MENU button-Press to display the main menu on the 30.
TV screen.
19. SELECT button-When setting program (for exam-
31.
pie: setting clock or timer program), press to deter-
TIME SEARCH button-Press to use Time Search
mode.
INDEX SEARCH-Press to use Index Search mode.
ADDIDELETE button-Press to add or delete channel
numbers during channel preset. Press to cancel a set-
ting of timer program. Press to correct digits when
setting program (for example: setting clock or timer
program).
TAPE COUNTER RESET button-Press
to
reset
counter to 0:00:00.
TAPE COUNTER MEMORY button-Press
to set
counter memory on and off.
SLOW button-Press to reduce the playback speed.
Slow speed can be controlled by pressing F.FWD
button (faster) or REWIND button (slower).
Powercord--Connect
to a standard
AC outlet
(120V/60Hz).
AUDIO OUT jack--Connect to an audio input jack of
your audio equipment or another VCR.
AUDIO IN jack--Connect to an audio output jack of
your audio equipment or another VCR.
ANT. IN terminal--Connect to an antenna or CATV.
VIDEO OUT jack--Connect to a video input jack of
your video camera or another VCR.
VIDEOIN jack-Connect to a video output jack of
your video camera or another VCR.
CH3/CH4 selector switch-Use to select a video out-
put channel (3 or 4) for playback from the VCR.
mine your selection and proceed to a next step you 32. ANT.OUT terminal--Connect to an antenna input
want to input. Press to determine setting modes from
terminal of your TV.
on screen menu.
Status function-Press
to display
the remain,
counter, or the current channel number and current
time on the TV screen.
EN
- 9 -
6A12
Advertisement
Table of Contents
