Quick Set Program - Sears 934.5512559 Owner's Manual

QUICK SET PROGRAM
You may set the VCR to start and end recording one program within 24 hours by simply pressing QUICK SET
PROGRAM button on the VCR. It is easy for you to set the timer for recording today's TV program.
* VCR power must be on to set Quick Set Program.
• Clock must be set to the correct time before setting the timer.
• Quick Set Program controls program number 8.
In the example below, the Quick Set Program is being set to record (current time is 6:00PM):
SETTING TIME from 9:30PM to 11:00PM
CHANNEL CH61
TAPE SPEED LP
NOTE: This function cannot be done by the remote control.
Insert a cassette tape with its safety tab in place. (If
necessary, rewind or fast forward the tape to the point
at which you want to begin
recording.) L_" _" I
The VCR display will 0:130:00 33
change to the count mode.
Press QUICK SET PRO-
GRAM button on the VCR. I.l_ . w_o, ' I Program number "8" ap- t s (. -_:OD,.- 37
pears on the display. _ ,
Set the desired start time.
Press START button repeat- [ i ,_ J
edly or hold it down until - "_°'' ,_
your desired start time is dis- L _8 (- . _:3D _€- 33
played.
Set the desired end time.
Press END button repeat-
edly or hold it down until
your desired end time is dis-
played.
-I 1:013 , ,r 37
Set the channel number.
Press CHANNEL • or •
button repeatedly or hold it
down until your desired
channel number is dis-
played.
p_ m WEO s C1_ ___
E_o 1l:13O _- G
7rq
Set the tape speed.
Press SPEED button until [displayed.. _° " t°" '
your desired tape speed is l
(AUTO-no display, SP, LP
or SLP)
• The tape speed can be changed at any step from [2]
to 15].
GRAM button to return to J'_ O:OD:DtJ
CN
original mode.
Press POWER/TIMER REC button to set Quick Set
Program.
This turns the VCR power
off, and the "1_" indicator | ,_
_o
lights up on the display. The
L 8:os..
program number "8" is dis-
played with current time.
- 22 - EN
-or _ ,k 5CI6