Installation Instructions - Fisher & Paykel FREESTANDING COOKER OR120 User Manual

Installation instructions

6
Fig. 1
Location
The installation conditions, concerning protection against overheating of the surfaces adjacent
to the cooker, must conform to Fig.3a or 3b.
The appliance must be kept no less than 200 mm away from any side wall which exceeds the
height of the hob surface (Fig. 3a or 3b).
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 75 °C above room temperature.
Do not install the appliance near flammable materials (eg. curtains).
If the cooker is located on a pedestal, provide safety measures to prevent it falling out.
Assembling the backguard
A
It is mandatory to install the backguard
Assemble the backguard as shown in Fig. 2
and fix it by screwing the five screws "A".
Fig. 2