Table of Contents
Advertisement
Installation instructions
11
Converting to a different gas type
This appliance is suitable for use with Natural gas or LPG gas (check the "gas type" sticker
attached to the appliance). To convert from one gas type to another, you need to replace the
injectors, and then adjust the minimum burning setting.
To replace the injectors
Remove pan supports and burners from the cooktop.
Using a spanner, remove the injector (shown in Fig.s following) and replace it with one
according to the gas type (see the 'Table for the choice of injectors').
Fix the warning label (supplied with the conversion kit) at the back of the cooker, near the gas
inlet connections. This label states that the gas cooktop has been converted for use with LPG
gas / Natural gas.
Important!
If the cooker is suitable for use with Natural gas and must be converted for use with LPG gas,
before connecting to gas main remove the appliance gas regulator and replace with test point
adaptor.
If the cooker is suitable for use with LPG gas and must be converted for use with Natural gas,
before connecting to the gas main remove the appliance test point adaptor and replace with gas
regulator.
Notes:
- Gas regulator and test point adaptor are supplied with the appliance (packed with conversion
kit).
- The burners are designed so that regulation of primary air is not required.
Injector
Injector
Fig. 8 Auxiliary and semi-rapid burners
Fig. 9 Triple-ring wok burner
Advertisement
Table of Contents
