Chicago Electric 94191 Assembly And Operation Instructions Manual page 18

squeeze thoroughly to dry. Then, squirt several drops of a light weight oil onto
the Element. Use compressed air to clean the Air Filter Separator. Then replace
the Air Filter Separator, Air Filter Element, and Air Filter Cover. Clean more often
under dusty conditions or when airborne debris is present. Replace Air Filter
parts if necessary. (See figure H.)
After every 100 hours of use:
c.
the Spark Plug Wire (36A). Use the accessory Spark Plug Wrench Kit (86A) to
remove the old Spark Plug. Install a new Spark Plug. Then, replace the Spark
Plug Wire. (See figure H.)
fuEl TANK
(31)
d. daily: Inspect the fuel filter (32): To do so, remove the Fuel Tank Cap (34).
Remove the Fuel Filter from the Fuel Tank (31). If necessary, use compressed
air to remove any dirt and debris from the Fuel Filter. Then replace the Fuel
Filter and Fuel Tank Cap. (See figure I.)
When storing the Generator,
5.
tion out of reach of children and other unauthorized people.
cAuTION! All maintenance, service, or repairs not mentioned in this
6.
manual must only be performed by a qualified service technician.
for technical questions, please call 1-800-444-3353.
SKU 94191
Replace the Spark Plug (28A). To do so, remove
fuEl TANK cAP
(34)
fuEl fIlTER
(32)
make sure to store the unit in a clean, dry, safe loca-
fIGuRE I
Page 18