Table of Contents
Advertisement
Introduction
Introduction
About this Manual
This manual describes how to operate the HDVC-MPCS from the HDVC-MPCS Console. By using the
HDVC-MPCS Console, you can perform operations such as starting a conference, changing the screen layout,
changing address book settings etc.
The HDVC-MPCS Console can be used by simply accessing a server that has the HDVC-MPCS software
installed from your computer's web browser. Special software is not required.
Feature Highlights
Image
HDVC-MPCS is multi-point conference software that enables setting up a flexible SIP communication system
with 6 to 16 participants for the HD Visual Communication Unit.
It is possible to separate the conference screen into a maximum of 16 parts, and customise the screen layout
or display position of the participants.
Sites that can be Connected
•
To connect to the HDVC-MPCS, the software version of the HD Visual Communication Unit must be
2.20 or later.
•
When using software version 2.30 or earlier for the HD Visual Communication Unit, it is necessary to start
a conference with 2 or more sites within approximately 30 seconds after connecting to the HDVC-MPCS.
Therefore, it is recommended to update to the latest software version. For details about how to update the
software, refer to the Operating Manual or User Manual of the HD Visual Communication Unit.
•
When using the KX-VC500 to connect to the HDVC-MPCS, it is necessary to activate the Connection
Enhancement feature with an activation key card (sold separately). For details about this feature, refer to
the Operating Manual or User Manual of the HD Visual Communication Unit.
2
Operating Instructions
HDVC-MPCS
HDVC-MPCS
Console
Advertisement
Table of Contents
