Manually Programming Timer Recording; Timer Recording Options - Panasonic Diga DMR-XW390 Operating Instructions Manual

Recording
Timer recording
Manually programming timer
recording
1
Press [PROG/CHECK].
Timer Recording Remain HDD 30:30 DR
Channel Name
New Timer Programme
Total 0/32
DEL
OK
Turn Resolve overlap
RETURN
Timer Off
2
Select "New Timer Programme", then press
[OK].
3
Select the items and change the items.
( right, Timer recording options)
4
Press [OK].
The timer programme is stored.
Timer Recording Remain HDD
Channel Name
Programme Name
New Timer Programme
To confirm and edit the timer programme
Refer to "To confirm and edit the timer
programme". ( 28)
Operation during Recording
Refer to "Operation during Recording". (
• When recording from the external equipment, "Mode"
(recording mode) is XP, SP, LP, EP or FR.
26
VQT4C72
FRI 01.01.2012 8:59
Space
Schedule Drive/Mode
Delete Info
Page Up
CH
Page Down
30:30 DR FRI 01.01.2012 8:59
Space
Schedule
Drive/Mode
FRI 01.01 HDD
OK
22:20 - 22:30 DR
24)

Timer recording options

Select the items and change the items.
e.g.,
Timer Recording Remain HDD 30:24 DR
Channel Day/Date Start Stop
1 SAT 8:00 9:00
OK
Category/ Date/
RETURN
AV Weekly
Channel
• You can select Category/AV with the red button.
Day/Date
• You can select "Date" or "Weekly" by pressing
the green button.
Start/Stop
• Press and hold [3, 4] to alter in 15-minute
increments.
Mode
Refer to page 7.
Renew
(Only daily/weekly timer recording)
The unit will record the new programme over the
old one.
1 Select "Renew".
2 Select "ON".
Input Name
1 Select "Input Name", then press [OK].
2 Refer to "Entering text". (
SAT 01.01.2012 8:05
Drive Mode Renew
HDD DR OFF
Input Name
81)