Manual Tuning; Preferred Language - Panasonic Diga DMR-XW390 Operating Instructions Manual

Manual Tuning

You can add new channels manually.
1 Select the channel.
2 Adjust the frequency.
• Adjust the frequency by checking the signal
strength and signal quality displays.
3 Press [OK] to start scan.
• The set channel is displayed in the table.
Update Channel List
You can update the channel list to the latest one.
Digital TV Update Channel List
Scan CH 21
This will take about 3 minutes.
RF Ch
Channel Name
Digital TV:0 Radio:0
Searching
RETURN
Press [RETURN ] when search is finished and
"Finished" is displayed.
• After performing "Update Channel List" or "Manual Tuning"
if the channel number has already been assigned,
channel number for them will be assigned from 800ch
onward.
Child Lock ( Parental Rating )
You can restrict the viewing of channels
unsuitable to children.
Set a ratings level to limit broadcast viewing and
playback.
• PIN is required to change. (
69
Type Quality
67)
Signal Condition
You can check the quality and strength of
signals.
Press [W X CH] to select the channel.
Signal Quality
Signal Strength
0 2 4
Network Name
RF Parameter [ ]
Good
Poor
RETURN
Bad
• Signal Quality:
Red bar: Bad
Yellow bar: Poor
Green bar: Good
• Signal Strength:
"0": 0%
"10": 100%
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.

Preferred Language

Select the language for multi broadcast.
If the selected language is not available, then the
original language will be selected.
Convenient functions
6 8 10
MHz
Channel Up
CH
Channel Down
69
VQT4C72