Specifications - Milwaukee 4004 Operator's Manual

Cat.
Amps Volts
No.
4004 20
4005 20
4079 20
4090 15
4094 20
4096 20
4097-20 15
WARNING
always unplug tool before changing or re-
moving accessories. Only use accessories
specifi cally recommended for this tool. Others
may be hazardous.
Assembling Dymorigs & Vac-U-Rig® Stands
For Cat. No. 4125 & 4130 only
Fig. 1
Hex bolt
Socket set
screws (2)
1. Set the base on the ground. Loosen the hex bolt
and nut (wrench not supplied). Raise the column
upright.
2. To core vertically or horizontally, insert the
large column bolt (provided in separate acces-
sory bag) through the bottom of column and into
the base. Tighten hex bolt and nut (wrench not
supplied).
To angle core, tilt the column to the desired
angle and tighten the hex bolt and nut. Save
the column bolt for future use when vertical or
horizontal coring.
3. Tighten the two (2) black socket set screws
located on the base with the supplied wrench.
4. Screw the four (4) handle spokes (provided in
separate accessory bag) into the hub on the
cradle assembly.

SPECIFICATIONS

Motor
Protection
120 Clutch
120 Clutch
120 Shear Pin
120 Shear Pin
120 Shear Pin
120 Clutch
120 Clutch
To reduce the risk of injury,
Handle
spoke
Cradle
assembly
Column
Base
Leveling
screws (4)
Column bolts
Speed
Low - 300 High - 600
Low - 600 High - 1200
Low - 300 High - 600
Low - 375 High - 750
Low - 450 High - 900
Low - 450 High - 900
Low - 500 High - 1000
ASSEMBLY
For Cat. No. 4115 & 4120 only
Fig. 2
Base
Lock washers
1. Set the base on the ground.
2. Remove two (2) bolts and two (2) lockwashers
from accessory bag.
3. Place the column in the slot of the base.
4. Insert two (2) bolts and two (2) lockwashers and
tighten securely.
Moving the Handle to the Other Side
For Cat. Nos. 4125 & 4130 only
Fig. 3
Socket
screws (4)
5
Suggested Diameters in
Medium Aggregate
Low - 7" - 14" High - 4" - 7"
Low - 4" - 7"
Low - 7" - 14" High - 4" - 7"
Low - 5" - 8"
Low - 6" - 10" High - 2" - 6"
Low - 6" - 10" High - 2" - 6"
Low - 3" - 5"
Cradle assembly
Column
Leveling
screws (4)
Bubble level
Cradle
High - 3/4" - 4"
High - 2-1/2" - 5"
High - 1-1/4" - 3"
Handle
spoke
Column
bolts (2)
Socket
screw
Ammeter
gauge
Meter
box
Cradle
lock