Setting The Video Output Format For Av Connector Connections; Switching The S-Video Output; Selecting The Type Of Paused Image To Display; Setting The Position Of The On-Screen Display - Marantz DVD Player User Manual

ENGLISH
Setting the Video Output
Format for AV CONNECTOR
Connections
When connections are made to the A/V EUROCONNECTOR
on the player via a SCART cable, it is possible to select the
video format that is compatible with your TV or monitor. Select
[Video] to have a composite video signal output, [S-Video] to
have an S-video signal output, and [RGB] to have an RGB
signal output. For more information on which format is most
appropriate, refer to the instructions supplied with your TV or
monitor.
Make changes to the [Video Out] setting in the Setup screen
Video menu.
Audio1 Audio2
TV Screen — 16:9(Wide)
Video Out
Set AV CONNECTOR video format
Move
Settings: Video*
S-Video
RGB
Switching the S-Video
Output
You can Switch the kind of S-Video signal output from the S-
Video outputs. If you connected your TV with an S-Video
cord, in rare cases the TV picture may appear stretched. In
this case switch the output from [S2] to [S1].
Make changes in the [S-Video Out] in the Setup screen
Video menu in the [Expert] menu mode (page 24).
Audio1 Audio2
TV Screen —
Video Out — Video
S-Video Out
Still Picture —
On Screen Display
Angle Indicator —
Move
Settings: S1
S2*
30
Video Language General
Video
S-Video
RGB
Exit
SETUP
* Factory setting
Video Language General
16:9(Wide)
S1
S2
— Position-Normal
On
Exit
SETUP
* Factory setting
Selecting the type of paused
image to display
This function lets you view a clear still-image when DVD
playback is paused.
Make changes in the [Still Picture] setting in the Setup
screen Video menu in the [Expert] menu mode (page 24).
Audio1 Audio2 Video Language
16:9(Wide)
TV Screen —
Video Out — Video
S-Video Out — S2
Still Picture Field
On Screen Display — Frame
Angle Indicator — On
Auto
Move
Settings: Field
(Picture shake will be eliminated during a paused
picture.)
Frame
(Select to obtain higher picture quality.)
Auto*
(Selects field or frame automatically according to
the disc.)
Setting the position of the
on-screen display
When watching conventional software on a wide screen TV,
the operation display is at the very top of the screen, and may
be difficult to see. Changing the position of the display lets
you see operation indicators clearly even on a wide screen
TV.
Alternatively, you can choose to turn them off completely with
the [Off] setting.
Make changes in the [On Screen Display] in the Setup
screen Video menu in the [Expert] menu mode (page 24).
Audio1 Audio2 Video Language
TV Screen — 16:9(Wide)
Video Out — Video
S-Video Out — S2
Still Picture — Field
On Screen Display Position-Wide
Angle Indicator — Position-Normal
Off
Move
Settings: Position-Wide
Position-Normal*
Off
Note
This setting is only effective with DVDs that contain a 4:3 aspect
ratio video presentation.
General
SETUP Exit
*
Factory setting
General
Exit
SETUP
* Factory setting