CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE MARANTZ PRODUCT. MARANTZ is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfi ed with the DVD player.
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer´s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- The equipment shall be installed near the power supply so that the power supply is easily accessible. WARRANTY For warranty information, contact your local Marantz dis- trib u tor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valua- ble purchase.
Table Of Contents 1 Before You Start Features ... 6 What’s in the box ... 7 Putting the batteries in the remote control... 7 Using the remote control ... 7 DVD-Video regions ... 7 Discs compatible with this player... 8 General Information for MP3/WMA/JPEG/DivX ...
• ENGLISH Before You Start Features USB Operation You can play or view the data fi les (JPEG, ® MP3, WMA, or DivX ) in the USB fl ash drive. CD Ripping This feature allows you to convert audio tracks from an audio CD into MP3 format. The created MP3 fi...
Before You Start What’s in the box Thank you for buying this MARANTZ prod uct. Please confi rm that the following accessories are in the box when you open • Remote control • AAA/R03 dry cell batteries x2 • Audio/Video cable (yellow/red/white) •...
• ENGLISH Before You Start Discs compatible with this player Any disc that displays one of the following logos should play in this player. Other formats, including DVD-RAM, DVD-ROM, CD-ROM (except those that contain MP3/ DivX/WMA/JPEG fi les) and Photo CD will not play.
Before You Start General information for MP3/WMA/JPEG/DivX • This player can recognize in total about 650 fi les per folders and 300 folder per disc for MP3/ DivX/WMA. • When writing MP3/WMA/JPEG/DivX fi les to CD- R/RW discs, always be sure to set the writing format to ISO 9660 Level 1.
Remote switch (USA only) • When using this DVD player independently, set this switch to INT. (INTERNAL). When using this DVD player in a system with a Marantz receiver equipped with a remote sensor, set the switch to EXT. (EXTERNAL). Important See Note: INT.
Page 11
Connecting Up Home theater video con nec tions This player outputs video in a number of different ways. Choose the one most suit able for your system using the guide below. If your TV has a component video input, we rec om mend using it to connect directly to the COM PO NENT VIDEO OUT of this player.
• ENGLISH Connecting Up Home theater audio connections This player outputs multi-channel audio in digital form. Check the manual for your amplifi er/receiver to see what equipment it is com pat i ble with (especially which digital formats such as Dolby Digital, DTS, etc. It can decode).
• When the connected device is HDMI/DVI compatible, the light fl ashes red. PRGSVE indicator • Lights when unit is outputting progressive scan (non-interlaced) video. 3 4 5 6 DVD PLAYER DV4003 STOP OPEN/CLOSE PLAY/PAUSE PROGRESSIVE SCAN AUDIO EX POWER ON/STANDBY •...
Getting Started STOP OPEN/CLOSE PLAY/PAUSE AUDIO EX Playing discs The basic playback controls for playing discs are cov ered here. Further func tions are detailed in the next chapter. Note • Throughout this manual, the term “DVD” means DVD-Video, and DVD ± R/RW. If a function is specifi c to a par tic u lar kind of DVD disc, it is specifi...
• ENGLISH Getting Started Basic playback controls Button What it does Starts playback. (Remote Control) In title menu, it functions as the Enter key. Pauses a disc that’s playing. (Remote Control) Each time the button is pressed, a new frame will appear. Stops playback.
Getting Started ENGLISH Navigating DVD disc menus Many DVD discs contain menus. Sometimes these are displayed automatically when you start playback; others only appear when you press MENU or TOP-M. Button What it does TOP-M Displays the “top menu” of a DVD disc. This varies with the disc.
• ENGLISH Playing Discs Introduction • Many of the functions covered in this chapter apply to DVD discs, Video CDs and CDs, although the exact operation of some varies slightly with the kind of disc loaded. • When playing DVD discs, if the appears on-screen when you try to use a particular function, either the player or the disc doesn’t allow the use of that...
Playing Discs Still Frame/Slow Play/Frame Advance Playback DVD-Video Video-CD The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame (Forward only). ENGLISH Viewing a Paused Picture Press 8 (PAUSE).
• ENGLISH Playing Discs Using the Repeat Play DVD-Video Video-CD JPEG DivX You can set the player to repeat individual tracks on CDs or Video CDs, chapters or titles on DVD discs, or the whole disc. It’s also possible to loop a section of a disc. You can’t use any repeat mode or looped play with a Video CD playing in PBC mode.
Playing Discs Looping a section of a disc Video-CD Press A-B once at the start of the section you want to repeat, then again at the end. Playback immediately jumps back to the start point and plays the loop round and round. •...
• ENGLISH Playing Discs Switching Camera Angles DVD-Video Some DVD-Video discs feature scenes shot from two or more angles. Check the disc box for details: it should be marked with a icon if it contains camera-angle scenes. • To switch the camera angle, press ANGLE. Note •...
Playing Discs Switching the Audio Language DVD-Video When playing a DVD-Video disc recorded with dialog in two or more languages, you can switch the audio language at anytime during playback. • To display/switch the audio language, press AUDIO repeatedly. The current audio language is shown on-screen. •...
• ENGLISH Playing Discs Preview function Video-CD SVCD DVD-Video Press SCAN. SVCD SELECT DIGEST TYPE TRACK DIGEST DISC INTERVAL TRACK INTERVAL SELECT DIGEST TYPE TITLE DIGEST TITLE INTERVAL Use the 5 / ∞ keys to select one of the following options and press ENTER. This option is only available during playback mode.
Playing Discs Play back Information This DVD system can display the disc playback information (for example, title or chapter number, elapsed playing time, audio/subtitle language) and a number of operations can be done without interrupting disc playback. DVD-Video Video-CD During playback, press DISP. A list of available disc information appears •...
• ENGLISH Playing Discs Angle Press 5 / ∞ to highlight “Angle”, then press ENTER to access. Use the numeric keypad (0-9) to enter in a valid number. Press ENTER to confi rm. Playback will go to the selected angle. Time Display Video-CD Press 5 / ∞...
Playing Discs Playing a MP3/DivX/JPEG/ ™ Windows Media Audio disc This DVD system can playback most of the MP3, JPEG and Windows Media ™ recorded on a CD-R/RW disc or commercial Insert a disc. The disc reading time may exceed 30 •...
• ENGLISH Playing Discs Playing a JPEG image fi le (slide show) Insert a Picture disc (Kodak Picture CD, • JPEG). For a Kodak disc, the slide show will begin automatically. For a JPEG disc, the picture menu will appear on the TV.
Playing Discs Playing MP3/WMA music and JPEG pictures simultaneously You can create a musical slide show if the disc contains both the MP3/WMA music and JPEG picture fi les. Insert an MP3/WMA disc that contains music and pictures. Select an MP3/WMA track in the menu and press PLAY 3 to start playback.
• ENGLISH Playing Discs Playing a DivX disc This DVD system supports the playback of DivX movies which you can copy from your computer onto a CD-R/RW, DVD ± R/ ± RW disc (see page 9 for more information). Insert a DivX disc. Press PLAY to start playback.
• Playback of the fi les recorded in all USB devices, and power supply to USB devices, are not guaranteed. Marantz shall not be held liable in the case of loss of fi les in a USB device connected to this player.
• ENGLISH Playing Discs Using the Setup Menu Before using the player, you should specify the settings to be used in accordance with the conditions under which the player is to be used. Note that once changed, the settings will be saved and remain the same even after the power has been turned off until the settings are changed again.
DVD Setup Menu A black dot ( ) in di cates the default setting * It can be set only during STOP. OSD LANGUAGE DIVX(R) VOD CODE MP3 RECORD DISC LOCK * GENERAL DISPLAY DIM SETUP PROGRAM * SCREEN SAVER SLEEP AUTO STANDBY AUDIO OUT...
Selects the preferred language for the DVD system on-screen display menu. DivX(R) VOD CODE MARANTZ provides you with the DivX (Video On Demand) registration code that allows you to rent and purchase videos using VOD service. Press 3 to see the ®...
Page 35
DVD Setup Menu MP3 RECORD This feature allows you to convert audio tracks from an audio CD into MP3 format. The created MP3 fi les are saved in your USB device. Connect the USB fl ash drive directly to jack on this unit. Load an audio CD.
Page 36
• ENGLISH DVD Setup Menu DISC LOCK • Default setting: UNLOCK Not all discs are rated or coded by the disc maker. You can prevent a specifi c disc from playing by locking the disc. Up to 40 discs can be locked. •...
• STEREO – This option will downmix Dolby Digital signals directly into analogue stereo from L/R jacks. • LT/RT – This option should be used only if your DVD player is connected to a Dolby Pro Logic decoder. Note • DTS is not supported.
Page 38
ENGLISH DVD Setup Menu LPCM OUT • Default setting: 48kHz If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial, you may need to adjust “LPCM Output”. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
DVD Setup Menu Setting up the VIDEO SETUP page Press the SETUP button. Select VIDEO SETUP PAGE using the cursor buttons ( 2 / 3 ), then press the ENTER button. Use the cursor buttons ( 5 / ∞ ) to select the desired item, then press the cursor ( 3 ) or ENTER button.
• ENGLISH DVD Setup Menu CHANGING PAL TO NTSC 1.ENSURE THAT YOUR TV SYSTEM SUPPORTS NTSC STANDARD. 2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV.WAIT IS SECONDS FOR AUTO RECOVER Video output format Disc Format system YCbCr NTSC PAL Progressive NTSC NTSC Progressive...
Page 41
DVD Setup Menu CONFIRM AGAIN TO USE PROGRESSIVE SCAN. IF PICTURE IS GOOD, PRESS OK BUTTON ON REMOTE. CANCEL 3) Press 2 to highlight OK in the menu and press ENTER to confi rm. The set-up is complete now and you can start to enjoy the high quality picture.
Page 42
• ENGLISH DVD Setup Menu Note • When the player is set to YCbCr, some TV may not properly synchronise with the player on the A/V EURO connector. HDMI SETUP This feature is only applicable if you have connected this DVD system to a HDMI- compatible TV/device.
Page 43
DVD Setup Menu Setup Examples Video Disc S-Video TV Aspect YCbCr Format (Progressive:OFF) 16:9 Wide 4:3 LB 16:9 4:3 PS* 4:3 PS* 16:9 Wide 4:3 LB 4:3 PS : When actual video output is Letterbox. ("TV Aspect" is 4:3panscan but disc does NOT permit Pan-scan.) : When actual video output is Pan-scan.
• ENGLISH DVD Setup Menu Setting up the PREFERENCE page Press 7 (STOP) twice to stop playback (if any), then press SETUP. Select PREFERENCE PAGE using the cursor buttons ( 2 / 3 ), then press the ENTER button. Use the cursor buttons ( 5 / ∞ ) to select the desired item, then press the cursor ( 3 ) or ENTER button.
Page 45
DVD Setup Menu DISC MENU Selects the preferred disc menu language for DVD playback. • Default setting: ENGLISH Use the 5 / ∞ keys to select a language and press ENTER to confi rm. Note • For some discs, selection can be made using the DVD menu.
Page 46
• ENGLISH DVD Setup Menu Use 2 / 3 / 5 / ∞ to select a title, or use the numeric buttons to enter the title number next to SELECT. • Press 4 / ¢ to access the previous/ next page. Press ENTER to confi...
Additional Information Language Codes This page is used to select other languages. This does not affect the options in AUDIO, SUBTITLE or DISC MENU. Abkhazian 6566 Afar 6565 Indonesian Afrikaans 6570 Interlingua (International) Albanian 8381 Interlingue Amharic 6577 Inuktitut Arabic 6582 Inupiaq Armenian...
The DVD player’s lens should not become dirty in normal use, but if for some reason it should mal func tion due to dust or dirt, consult your nearest MARANTZ-authorized service center. Al though lens cleaners for CD players are com mer cial ly available, we do not recommend using them since some may damage the lens.
A damaged power cord can cause a fi re or give you an electric shock. Check the power cord once in a while. If you fi nd it damaged, ask your nearest MARANTZ authorized service center or your dealer for a re place ment. •...
If the trouble cannot be rectifi ed after checking the items below, ask your nearest MARANTZ authorized service center or your dealer to carry out repair work. The disc is ejected automatically after loading.
Page 51
Additional Information The remote control doesn't seem to work. • The remote control is too far from the player, or the angle with the remote sensor is too wide. Use the remote control within its operating range (page • The batteries are exhausted. Put in new batteries (page 7).
Theater's mode with DivX” certifi ed encoder. No sound during DivX movies playback. • The audio codes may not be supported by the DVD player. A DivX movie does not repeat. • Check that fi le size of the movies does not exceed the fi le size of the CD disc during burning.
Additional Information Specifi cations General System DVD-Video, DVD ± R/RW, Video CD, CD, MP3 fi les, JPEG fi les, DviX, WMA and USB Power requirements (U.S.A.)... 120 V, 60Hz Power requirements (Europe) ... 230 V, 50Hz Power consumption...16 W Power consumption in standby mode ...
Page 54
Printed in China 3139 245 31301 2008/09 541110153029M...