Marantz DVD Player User Manual page 18

ENGLISH
Setting digital audio connections to an
AV amplifier or decoder
The [Digital Jack] screen establishes whether digital
connections have been made to an AV amplifier, receiver, or
external decoder. As there are numerous options available,
please refer to the instructions supplied with the component
the player is connected to determine what digital audio
formats can be decoded. If you have made no digital
connections, select [Not Connected].
Audio1 Audio2
Setup Navigator
Amp Connection
Digital Jack
Move
Settings: Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or not
the AV component the player is connected to is capable of
processing an audio signal with a sampling rate of 96 kHz.
This screen only appears if connections have been made to
an external AV component as determined in previous
screens.
Audio1 Audio2
Setup Navigator
Amp Connection
96 kHz PCM Audio
Move
Settings: No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of 96
kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of 96
kHz.
Don't Know
Select if you are uncertain whether the connected
AV component can process an audio signal with a
sampling rate of 96 kHz.
Note
When a DVD is played back in the letter box format, 96 kHz Linear
PCM digital audio playback is automatically downsampled to 48
kHz. In order to hear audio at the sampling rate of 96 kHz, set the
Setup screen Video menu [TV Screen] setting to either
[16:9(Wide)] or [4:3 (Pan & Scan)] (page 29).
18
Video Language General
Dolby Digital
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
Select Exit
ENTER SETUP
* Factory setting
Video Language General
No
Yes
Don't Know
Select Exit
ENTER SETUP
* Factory setting
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Audio1 Audio2 Video Language
Setup Navigator
Save Changes
Exit Setup Navigator
Start Again
Move ENTER Select
Settings: Save Changes*
Select to have the player make all of the
necessary audio, video and language settings
automatically.
Delete Changes
Select to exit the Setup Navigator without
changing any of the system settings.
Start Again
Select to return to the [OSD Language] screen of
the Setup Navigator and do the settings again.
To exit the Setup screen
When you have completed setting up the player using the
Setup Navigator or if you exit the Setup Navigator, the Setup
screen General menu appears. Press SETUP to close the
Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup screen
menus is described on page 23.
General
Delete Changes
SETUP Exit
* Factory setting