Playback; Sleep Timer Function - Marantz SR5006 Owner's Manual

Playback

1
Z2
Press to set the remote control
unit to ZONE2-operation mode.
2
Press ON Z to turn on the ZONE2
power.
"ZONE2 ON" appears on the display.
The indicator on the display lights
(vpage 121).
STANDBY X
• When is pressed, ZONE2
turns off.
• Power in ZONE2 can be turned on or off by
ZONE2 ON/OFF
pressing on the main unit.
3
SOURCE d SOURCE f
Press or .
The audio signal of the selected source
is output to ZONE2.
SOURCE SOURCE
• Every time you press d or
switches in the following order.
INPUT SELECTOR ZONE SELECT
• Turn after pressing
unit to select an input source.
z
ZONE2 ZONE2 ZONE2 ZONE2
Source Source BD DVD
ZONE2
M-XPort
ZONE2 ZONE2 ZONE2
TUNER CD NET/USB
z When "ZONE2 Source" is selected, the input source for MAIN
ZONE will be assigned to ZONE2.
BD
Adjusting the volume
VOLUME + –
Use , to adjust the volume.
GAdjustable rangeH – – –
(When the "Volume Display" (vpage 101) setting is "Relative")
GAdjustable rangeH
(When the "Volume Display" (vpage 101) setting is "Absolute")
• At time of purchase, "Volume Limit"
"–10dB (71)".
VOLUME
• Turn after pressing
adjust the sound volume.
• For "w ZONE2 playback by audio output", adjust the volume on the
f, the input source
connected amplifier.
Turning off the sound temporarily
on the main
MUTE
Press .
The sound is reduced to the level set at "Mute Level" (vpage 101)
ZONE2
in the menu.
VCR
• To cancel, either adjust the volume or press
• The setting is canceled when the zone's power is turned off.
ZONE2
SAT
ZONE2 ZONE2
AUX
–80dB – –40dB – 18dB
0 – 41 – 99
(vpage 101) is set to
ZONE SELECT
on the main unit to
MUTE
again.
79

Sleep timer function

This is useful when you want to sleep while listening in ZONE2.
1
Press Z2 to set the remote control
unit to ZONE2-operation mode.
2
SLEEP
Press and display the time
you want to set.
• The time switches as shown below each
SLEEP
time is pressed.
OFF 10 min 20 30
120 110 100 90 80
To confirm the countdown time before putting the
unit to sleep
SLEEP
Press .
"Z2 Sleep zmin" appears on the display.
z Countdown time
To cancel the sleep timer
SLEEP
Press to set "OFF".
The sleep timer is also canceled when the ZONE2 power is turned off.
40 50
70 60