Marantz SR5006 Owner's Manual page 100

Network Setup
Make network settings.
Setting items
Network Connect. Only set "Network Connect." when connecting to a network without a
Make settings for wired DHCP function.
LAN.
q On the menu, select "Network Connect." –
"Detail" and press
uio p
w Use
ENTER
press
The DHCP function is disabled.
BD
Default settings are underlined.
Setting details
Network Connect.
DHCP OFF
IP Address 192.168.0.1
Exit
Detail
q
[ENTER] Enter [ ] Return
w
Network Connect.
DHCP OFF
IP Address 192.168.000.001
Subnet Mask 255.255.255.000
Default Gateway 000.000.000.000
e
Primary DNS 000.000.000.000
Secondary DNS 000.000.000.000
Proxy
r
Exit
[ ] Cancel
ENTER
.
to set "DHCP" to "OFF", then
.
Setting items
Network Connect. uio p
e Use
(Continued)
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
• Subnet Mask : When connecting an xDSL modem or terminal
adapter directly to this unit, input the subnet mask indicated in
the documentation supplied by your provider. Normally input
255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its
IP address.
• Primary DNS, Secondary DNS : If there is only one DNS address
indicated in the documentation supplied by your provider, input it at
"Primary DNS". If there are two or more DNS addresses, input the
first one at "Secondary DNS".
i
r Use
Setup is complete.
• When connecting to the network via a Proxy server, select "Proxy" and
ENTER
press
• If you are using a broadband router (DHCP function), there is no need
to make the settings at "IP Address" and "Proxy", since the DHCP
function is set to "ON" in this unit's default settings.
• If this unit is being used connected to a network without the DHCP
function, the network settings must be made. In this case, some
knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and
settings (vpage 18).
• If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased your
computer.
• When you want to cancel the setting during IP address input, press
RETURN
97
Setting details
ENTER
to input the address and press
ENTER
to select "Exit" and press .
(vpage 98 "Proxy settings").
.
System Setup
.
vSee overleaf