Table of Contents
Advertisement
186
[5]
The Logical Block Address field specifies the starting logical block address for the target to read data from
its own medium. This data is a source for the regenerate operation.
[6]
The Regenerate Length field indicates the length in logical blocks of the resulting Xor data. It also speci-
fies the length in logical blocks that is transferred from each of the specified sources.
[7]
The parameter data for the Regenerate command is defined in Table 137. This parameter data describes
the other devices that will be sources for the regenerate operation. The target receiving the Regenerate
command is implicitly a source and is not included in the parameter data.
[8]
See "Control byte," paragraph 4.2.6.
SCSI Interface Product Manual, Rev. J
Advertisement
Table of Contents
