Table of Contents
Advertisement
SCSI Interface Product Manual, Rev. J
If any of the following conditions occur, this command shall be terminated with a Check Condition status, and if
extended sense is implemented, the Sense Key shall be set as indicated in the following table. This table does
not provide an exhaustive enumeration of all conditions that may cause the Check Condition status.
Condition
Invalid Logical Block Address
Target reset since last command from this initiator
Unrecoverable read error
Recovered read error
Note.
The extended sense information bytes shall be set to the Logical Block Address of the first invalid
address.
Sense Key
Illegal Request (see note below)
Unit Attention
Medium Error
Recovered Error
163
Advertisement
Table of Contents
