Finalizing The Installation; Glass Frame Removal And Installation - Travis Industries Revolution 36CF Installation Manual

38

Finalizing the Installation

Glass Frame Removal and Installation

WARNING: Prior to removing the glass, shut off gas to the appliance (or remove the
batteries from the battery box and shut off electricity to the fireplace). This
prevents any chance of accidental burner ignition when accessing the firebox.
Warning: The appliance must
be completely cool before removing
the glass.
Warning: Do not strike or slam
the glass.
Remove the glass trim (see
directions to the right).
The glass frame is held in place with
two latches along the top and two
slots, with brackets, along the
bottom. Insert the glass latch tool
into the latch, pull it forward and up
to detach the latches (see pictures
below). Once the latches are free,
pivot the frame out and lift it off the
brackets at the bottom of the glass
frame.
© Travis Industries
(for qualified installers only)
4090102
Glass Frame
Glass Trim
Attach the glass trim to the glass frame by
inserting the hooks on the trim over the
studs on the glass frame. When properly
aligned, the frame will push straight in
and drop into place.
Figure 25
100-01212_000