Journal Printing - SATO GL408e Programming Reference Manual

Unit 4: Standard Command Codes

JOURNAL PRINTING

FUNCTION To print text in a line by line format on a label. By specifying this command, you
automatically select Font XS with a Character Expansion of 2x2. You also establish a
base reference point of H2,V2. The character pitch is 2 dots and the line gap is 16
dots. Simply issue an ASCII <CR> at the end of each text line.
FORMAT <ESC>J
Place immediately following <ESC>A.
EXAMPLE <ESC>A
<ESC>J WITH THE JOURNAL FEATURE YOU CAN PRINT TEXT WITHOUT
USING ANY FONT COMMANDS
OR POSITION COMMANDS
<ESC>Q1
<ESC>Z
OUTPUT
(4-14)
NOTES Journal mode assumes a maximum label width. Otherwise, you may print where
there is no label and damage your print head.
It is effective only for the current print job.
SATO GL4xxe SBPL Programming Reference Page 4-19