SATO GL408e Programming Reference Manual page 124

FORM OVERLAY, RECALL
FUNCTION
To recall the label image from stored in the Expanded Memory.
FORMAT <ESC>&R,aa
Place immediately following the <ESC>CC Memory Area Select command.
EXAMPLE
<ESC>A
<ESC>CC1
<ESC>&R,01
<ESC>Q1<ESC>Z
OUTPUT There is not a printer output as a result of this command.
NOTES The Expanded Memory option is required fro this command.
The <ESC>CC Memory Area Select command must be sent prior to this command.
Several images stored under different storage numbers can be printed with this
command. The storage number must be speciifed.
A read/write error will occur if an unused storage number is specified.
The label image can be moved by using the <ESC>V and <ESC>H commands when
it is stored along with a window size. If it exceeds the printable area by being moved,
the label image will be trancated.
Refer to Appendix, Table 36 for additional information.
SATO GL4xxe SBPL Programming Reference
aa = Storage number (01 to 99)
Unit 5: Optional Command Codes
Page 5-14