Ean/Ucc Composite Symbol - SATO GL408e Programming Reference Manual

Unit 4: Standard Command Codes

EAN/UCC COMPOSITE SYMBOL

FUNCTION Specifies the composite symbol of EAN/UCC.
FORMAT 1
<ESC>EUaabbn~n
Place anywhere after <ESC>V but before <ESC>Q.
FORMAT 2
<ESC>EUaabbcccn~n
Place anywhere after <ESC>V but before <ESC>Q.
EXAMPLE <ESC>A<ESC>V0100<ESC>H0100<ESC>EU01040361234567890|11990102
<ESC>Q1<ESC>Z
NOTES
This command does not support RSS Expand. Print of HRI cannot be designated with
this command. If the value in 1D barcode symbology is not set to the data portion,
composite symbol will not be printed.
SATO GL4xxe SBPL Programming Reference
a = 1D barcode symbology
a = 01 : RSS-14
02 : RSS-14 (Truncated)
03 : RSS-14 (Stacked)
04 : RSS-14 (Stacked Omnidirectional)
05 : RSS (Limited)
07 : UPC-A
08 : UPC-E
09 : EAN13
10 : EAN8
b = Minimum Bar Width (01 to 12 dots)
n = Print Data (Sum of 1D and 2D codes up to 120-digit)
a = 1D barcode symbology
a = 11 : UCC/EAN128 with CC-A/B
12 : UCC/EAN128 with CC-C
b = Minimum Bar Width (01 to 12 dots)
c = Height of Barcode (001 to 500 dots)
*Specify the value of [Height of barcode] when setting [Minimum
bar width] to [01]. For instance, if setting [Minimum bar width] is
[03] / [Height of barcode] is [100], [Height of barcode] will be 300
dots.
n = Print Data (Sum of 1D and 2D codes up to 120-digit)
Page 4-33