Salus RT500BC Instruction Manual page 7

Programmable digital thermostat with rf boiler control

Table of Contents

RT500 THERMOSTAT DEFAULT SETTINGS

Changes to the default settings should only be made by the Engineer

carrying out the installation or other qualified person.

The installer should select the "jumper"

positions required if changes need to be

made to the factory default settings. The

"jumpers" are found on the rear of the

RT500.

Jumper

Program

Span

1,2,3,4,5

NOTE:

The Reset button must be pressed after changing jumper positions.

RT500BC INSTRUCTION MANUAL

Function

Jumper for 5-2 (factory default setting) or 7

individual days programming.

Movable jumper for selecting temperature span

of ± 0.5°C (factory default setting) or ± 1.0°C

Removable jumpers for altering the RF address

code when used in conjunction with the

teaching mode of the boiler control.

Table of Contents

Show Quick Links

Table of Contents