Day Mode - Salus RT500BC Instruction Manual

7 DAY MODE

The RT500 also offers a 7 day programming mode, which allows you to
programme five different sets of time and set point temperatures for each
day of the week to give a total of 35 separate programme settings.
To review or change a programme, press the SET key when the RT500 is
in Normal mode. This will change the unit status to Programme Setting
mode.
The LCD display will display programme number 1 and SET PROG, with all
other indicators cleared. The weekdays will be flashing to indicate they are
the selected item and are ready to be adjusted.
Pressing the SET key at any time when in programming mode will return
the RT500 into Normal mode. Press the SELECT key to confirm the Day
selection. Once this is set, the 'Hour' will flash to indicate that it is the
selected item and is the next item to be adjusted:
18
Press the UP or DOWN key to change the
display to indicate the single day you
want to programme:
RT500BC INSTRUCTION MANUAL