Salus ST620WBC Instruction Manual page 26

Salus ST620WBC Manual 013_89 09/02/2012 14:01 Page 26
Use the Touch Ring to enter the date in exactly the same way as for the holiday start date.
By default, the HOLIDAY mode start and end dates are set to the current date. Make sure
that the end date is after the start date – if not, the HOLIDAY mode will be disabled.
The final setting to be entered is the protection temperature you want set while HOLIDAY
mode is active.
Use the Touch Ring to set the preferred temperature and confirm the choice using the OK
button. Once the temperature setting is confirmed, the HOLIDAY mode will be activated.
While in this mode the HOLIDAY mode indicator will be shown on the display, but
there will not be any MANUAL or AUTO indication. Pressing the Touch Ring will change the
display to show the current temperature setting, but this setting cannot be adjusted while
in this mode.
26 ST620WBC INSTRUCTION MANUAL