Holiday Function - Salus ST620WBC Instruction Manual

Salus ST620WBC Manual 013_89 09/02/2012 14:01 Page 24
After entering the settings in Programmes 1 to 6 for Monday(1), the ST620 display will change to display a COPY TO
screen. On this screen, scroll to the day that you want to copy the settings to using the Touch Ring, and then confirm
this by pressing the OK key. The ST620 will then move to the next day and ask if you would like to copy again.
In the example here, Monday(1) has been programmed, and the next day that has not been programmed is Tuesday(2).
Once the settings for Tuesday(2) have been programmed by copying, the settings can then be copied to Wednesday(3),
and so on.
Pressing the Arrow key at any time will return the ST620 to the previous screen. Once all the days have been
programmed, the ST620 will revert to AUTO mode.
Please be aware that each of the programme time settings must be in sequence: for example, Programme 3
cannot be set with a time earlier than Programme 2. If this situation occurs, then the ST620 may operate in an
unpredictable way. The programmable thermostat will return to NORMAL mode after 10 seconds if no Key is pressed
or if no movement is detected on the Touch Ring. In this case, the Programmes will not be updated

HOLIDAY FUNCTION

Entering the HOLIDAY menu allows you to turn the holiday override mode of the ST620 on. The HOLIDAY mode allows
the user to override all the current Programme settings with a specific temperature setting that is active between two
dates entered by the user.
When the holiday start date arrives, the HOLIDAY indicator turns on and the HOLIDAY mode is switched on. As long as
the ST620 is in HOLIDAY mode the FROST protection mode will be disabled. When the holiday end date is reached, the
HOLIDAY mode will be turned off automatically and the ST620 will operate in AUTO mode. The HOLIDAY mode indicator
will be displayed on all the HOLIDAY menu screens.
24 ST620WBC INSTRUCTION MANUAL