Salus ST620WBC Instruction Manual page 23

Salus ST620WBC Manual 013_89 09/02/2012 14:01 Page 23
The hour setting will be the first setting that needs to be adjusted, and
this will easily be seen because the 'hours' section of the time will be
flashing. Using the Touch Ring, scroll up or down to adjust the hour to
the required setting and then press the OK key to confirm.
After confirming this setting the 'minutes' section of the time will then
start to flash. Change this setting using the Touch Ring in the same way
that you changed the hour setting, confirming your setting with the
OK key. Finally, set the desired temperature setting by scrolling with
the Touch Ring and again confirm with the OK key.
Following this sequence you will have set up Programme 1 – the ST620
display will then move on to Programme 2. Continue to add your
desired settings for each of the programmes through to Programme 6
in the same way as Programme 1 (hour, minutes, and temperature).
If you decide to enter settings for individual days rather than Weekdays or Weekends, the ST620 also offers a time saving
COPY function that allows the user to copy settings from one day to another.
ST620WBC INSTRUCTION MANUAL 23