Specifying The Pattern At Power-On - Boss Dr. Rhythm DR-880 Owner's Manual

System settings
Parameter/
Range
TSC SelMod
LINK, MANUAL TSC select mode
LINK:
The TSC patch specified individually for each pattern
and song will be used for playback.
MANUAL:
The currently selected TSC patch will be used for play-
ing any pattern or song.
4. When you've made the setting, press
[EXIT].
The message "Now writing..." will appear,
and the currently setting will be saved.
When the currently setting have been saved,
the message will disappear.
* Do not turn off the power while the message is displayed.
Your data may be damaged if you do so.
124
Explanation
Specifying the pattern at
power-on
Here's how you can specify the pattern that will
be selected immediately after the DR-880 is
powered on.
1. From the pattern or song play screen,
press [EDIT].
The edit menu screen appears.
2. Move the cursor to the "PLAY OPTION"
icon, and press [ENTER].
The Play Option screen appears.
fig.07-100d
3. Move the cursor to the "PowerOnPtn,"
and use the VALUE dial to select the
patch number.
Range: P001–U500
fig.07-120d
4. When you've made the setting, press
[EXIT].
The message "Now writing..." will appear,
and the currently setting will be saved.
When the currently setting have been saved,
the message will disappear.
* Do not turn off the power while the message is displayed.
Your data may be damaged if you do so.