Boss Dr. Rhythm DR-880 Owner's Manual page 87

Parameter edit screen
fig.04-070d
(6) Effect block diagram (algorithm)
Use [CURSOR]
parameter edit screen for the effect at the
cursor location.
(7) Parameters
Move the cursor to the parameter you want
to edit, and use the VALUE dial to change the
value.
You can use [CURSOR]
parameter display.
2. When you have made the setting, press
[EXIT] to return to the guitar effects edit
screen.
In order to indicate that the effect settings
have been temporarily changed, the patch
number will be displayed as "*TMP." If you
re-select an effect patch, or turn off the DR-
880 while "*TMP" is being displayed, all of
the patch settings will return to their
previous condition. As it may not be possible
to restore these settings, the appropriate care
should be taken.
3. If you want to keep the changes you
made, proceed as described in "Saving/
Copying an Effect patch" (p. 88).
* If you want to name the effect patch or edit the name,
proceed to "Naming an effect patch" (p. 88) before you
save.
( 6 )
( 7 )
/ to switch to the
/ to scroll the
Using effects
87