Copying A Kit - Boss Dr. Rhythm DR-880 Owner's Manual

Saving/Copying a kit

Copying a kit

1. In the first kit edit screen, move the
cursor to "COPY" and press [ENTER].
The kit copy screen appears.
fig.06-160d
2. Move the cursor to the copy-source kit
number, and use the VALUE dial to select
the number of the kit that you want to
copy.
3. Move the cursor to the copy-destination
kit number, and use the VALUE dial to
select the kit number to which you want
to copy.
4. To execute the copy, press [ENTER].
If you decide to cancel, press [EXIT].
The message "Now writing..." will appear,
and the copy will be carried out.
When the copy is completed, the message
will disappear.
* Do not turn off the power while the message is displayed.
Your data may be damaged if you do so.
114
Copy
source
Copy
destination