■ Changing the Pattern Progression in Auto Mode
You can change the pattern progression
when performing in Auto mode.
1. With the performance stopped, press
[EDIT].
The Edit Menu screen appears.
fig.09-01d
2. Press [
], select a <SYSTEM>, then
press [ENTER].
fig.09-02d
3. Press [
], select a <Auto Type> to be
set.
fig.09-04d
Chapter 3 Playing Styles (Auto Mode [AUTO])
4. Turn the VALUE dial to set the value.
Parameter
ABC, ABC 4, ABC 8, ABC 16,
AutoType
AB, AB 4, AB 8, AB 16
The letters indicates the sequence of the
verses.
The numeral represents the number of
measures performed in each verse.
When the number of measures has been
specified by means of a value that has been
set, then regardless of the original number of
measures in each verse, the verse is repeated
only for the number of measures specified.
Example: When performing a Style with a
Verse A of four measures, a Verse B of two
measures, and Verse C of two measures.
- With "ABC" for "AutoType"
The sequence with Verses A, B, and C played
once each is repeated.
fig.09-ABC4
Fill-in B
Fill-in C
Verse A
Intro
(4 meas.)
Verse B
(2 meas.)
Performance repeats automatically
- With "ABC4" for "AutoType"
The sequence in which four measures of
Verses A, B, and C are played is repeated.
fig.09-ABC4
Fill-in B
Verse A
Verse Bx2
Intro
(4 meas.)
(4 meas.)
Performance repeats automatically
5. Press [EXIT] a number of times until you
exit Edit mode.
Value
Fill-in A
Ending
Verse C
(2 meas.)
Fill-in C
Fill-in A
Verse Cx2
(4 meas.)
47