Operation; TurnNg Power On; Channel SelectOn - Icom IC-F110 Instruction Manual

2

OPERATION

■ Turning power ON
q Push [ ] to turn the power ON.
w If the transcever s programmed for a start up passcode,
nput the dgt codes as drected by your dealer.
• The keys n the table below can be used for password nput:
• The transcever detects numbers n the same block as dentcal.
Therefore "01234" and "56789" are same.
KEY
NUMBER
e When the "PASSWORD" ndcaton does not clear after n-
puttng 4 dgts, the nput code number s ncorrect. In ths
case, turn the power off and start over.
7
0 1 2 3
5 6 7 8
■ Channel selection
Several types of channel selecton are avalable. The meth-
ods may dffer accordng to your system setup.
NON-BANK TYPE:
Push [ ]/[ ] to select the desred operatng channel n
sequence; or, push one of the [CH 1] to [CH 4] keys to select
a channel drectly.
BANK-TYPE:
4
Push [BANK] to select the desred bank number or name.
9
AUTOMATIC SCAN TYPE:
Channel settng s not necessary for ths type. When turnng
the power ON, the transcever automatcally starts scannng.
Scannng stops when recevng a call or when takng the m-
crophone off hook.