3
CONNECTION AND MAINTENANCE
■ Mounting the transceiver
The unversal mountng bracket suppled wth your transcever
allows overhead mountng.
• Mount the transcever securely wth the 4 suppled screws
to a thck surface whch can support more than 1.5 kg.
Nut
Flat washer
Felt*
Spring washer
Felt*
When using
self-tapping screws
13
*Felts reduce the vibration effects.
■ Optional UT-108 installation
Install the optonal UT-108 unt as follows:
q Turn the power OFF, then dsconnect the DC power cable.
w Unscrew the 4 cover screws, then remove the bottom
cover.
e Install the unt as shown n the dagram below.
r Replace the bottom cover and screws, then re-connect
the DC power cable.
UT-108
Front panel