Hunter Type 2 Owners And Installation Manual page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-3. Install the included Pin-Based CFL bulb (26 Watt Maximum) into
the socket.
7-4. Thread the pull chains through the grommet holes on the sides
of the bracket. Then, thread them through the holes in the metal
disc.
7-5. Lift the glass bowl up so the threaded finial rod fits through the
hole in the glass bottom.
7-6. Place the cover plate up against the glass bowl. Align the holes in
the cover plate with the grommet hole of the metal disc.
7-7. Screw the finial onto the threaded rod end until tight.
Step 7-7
Threaded
Rod
14
45075-01 • 03/29/11 • Hunter Fan Company
Light
Bulb
Metal Disc
Steps 7-3 – 7-4
Finial
Step 7-5
Chain
Grommet
Hole
Step 7-5
Glass Bowl
Cover
Plate