E2B1 Fns Cover Sheet Tray Timeout - Ricoh DDP92 Maintenance Manual

5.2.27.

E2B1 FNS COVER SHEET TRAY TIMEOUT

PRIMARY FACTOR; Even if the Cover Sheet Tray is driven for 10 seconds, the Sheet Tray Upper Limit PS or Sheet
Tray Lower Limit PS does not detect the Tray.
PHENOMENON CAUSES & CHECK POINTS
1. Cover Sheet Tray 1.
does not operate.
2.
3.
2. This phenomenon 1.
occurs though the
Cover Sheet Tray
operates.
2.
3.
4.
Figure 5-14. Error Code E2B1
5-28
DDP92/184 Finisher Maintenance Manual
The breaking of Interface
cables or the disconnect-
ing of connectors.
Motor fault.
PCB fault.
Sensor is incorrectly set.
The breaking of Interface
cables or the disconnect-
ing of connectors.
Sensor fault.
PCB fault.
CORRECTIONS
Repair the cable or reset the
connector
CN2 (PI-108H P/K) - M201
Replace:
Sheet Tray Motor (M201)
Replace:
PI-108H P/K
FS-108H/HBM P/K
Reset the Sensor correctly.
Sheet Tray Upper Limit PS
(PS204)
Sheet Tray Lower Limit PS
(PS203)
Repair the cable or reset the
connector
CN51 - PS203
CN51 - PS204
Replace:
Sheet Tray Upper Limit PS
(PS204)
Sheet Tray Lower Limit PS
(PS203)
Replace:
PI-108H P/K
FS-108H/HBM P/K
M M L
Maintenance
Ref + Page
3.5, 3-7
3.5, 3-7
3.5, 3-7
3.4, 3-3
3.4, 3-3
3.4, 3-3
3.4, 3-3
3.5, 3-7
3.5, 3-7
0 0