Honeywell Q7300H System Integration Manual page 59

Q7300H COMMUNICATING SUBBASE SYSTEM INTEGRATION USER ADDRESS MANUAL
User Address
SrcTodEventNext0 This is the next occupancy state according to the internal schedule of the T7300 (in local schedule mode).
SrcTuncos0 This is the Time Until Next Change-of-State of the occupancy mode.
When the node is in local schedule mode, the scheduled occupancy is shared with up to four other nodes via
network variables nvoOccSchedule0, nvoOccSchedule1, nvoOccSchedule2, and nvoOccSchedule3. In a
Honeywell LonWorks
controller so that a user interface may use the schedule assignment file to identify the nodes controlled by this
schedule. In a third party environment, each of these network variables may be bound to more than one node.
In local schedule mode, all four of these network variables are controlled by the thermostat schedule. The three
fields of each network variable have the value or state as determined by the thermostat schedule. The fields for
one of these network variables follows. The other three network variables are identical.
In remote schedule mode, the node no longer sends the nvoOccScheduleX network variables on the network.
If the node transitions from local to remote schedule mode, the values in nvoOccScheduleX are not changed
from the previous value.
SrcSchedOcc0 is the current scheduled occupancy state and SrcTodEventNext0 is the next scheduled
occupancy state. The next state occurs in SrcTuncos0 minutes. The only occupancy states supported by this
product are:
SrcTodEventNext1 This is the next occupancy state according to the internal schedule of the T7300 (in local schedule mode).
This is the Time Until Next Change-of-State of the occupancy mode.
SrcTuncos1
SrcTodEventNext2 This is the next occupancy state according to the internal schedule of the T7300 (in local schedule mode).
SrcTuncos2 This is the Time Until Next Change-of-State of the occupancy mode.
SrcTodEventNext3 This is the next occupancy state according to the internal schedule of the T7300 (in local schedule mode).
SrcTuncos3 This is the Time Until Next Change-of-State of the occupancy mode.
SrcYear Always 0xFFFF to indicate that this node is not capable of sending the full time-of-day information.
NOTE: For additional information, refer to the Echelon®
LonMark® Application Layer Interoperability
Guidelines, Version 3.0, (available from
LonMark® at internet address: www.lonmark.org.)
and the SNVT Master List and Programmer's
Guide.
Table A5. Shared Points (Right).
]
Bus environment, each of these network variables may be bound to one other

Occ Space is occupied or is scheduled to be occupied in the future. 

UnOcc Space is not occupied or is scheduled to be unoccupied in the future.
Null There is currently no local schedule programmed.
Comments
59 63-4366