Honeywell Q7300H System Integration Manual page 25

Q7300H COMMUNICATING SUBBASE SYSTEM INTEGRATION USER ADDRESS MANUAL
User Address

AuxContactorMode False
1
BdTempOffset Scaled in 0.5 degrees F.
CoolCycHr1 3, or 4 Cycles Per Hour for cooling stage 1.
CoolCycHr2 3, or 4 Cycles Per Hour for cooling stage 2.
CoolCycHr3 3, or 4 Cycles Per Hour for cooling stage 3.
DeadBand 2 to 10 degrees F.
DisplayDegC Degree Temperature Display: 0 –Fahrenheit; 1–Celsius
Display24Hr Clock Format: 0 = 12 hrs; 1 = 24 hrs
DlcBumpTemp Specifies the amount of shift in the controlled space temperature when demand limit control (DlcShed) is
active.
CoolOccSpt NciSetpoints specify the scheduled space temperature setpoint for various operating modes and effective
occupancy. Setpoints may be changed during day-to-day operation of the node by a networked operator
interface. When the local schedule is active, nciSetpoints can also be changed from the front panel of the
thermostat. The fields specify the setpoint temperature for heating and cooling modes and effective occupancy
(Occ, Standby, or UnOcc).
CoolStbySpt NciSetpoints specify the scheduled space temperature setpoint for various operating modes and effective
occupancy. Setpoints can be changed during day-to-day operation of the node by a networked operator
interface. When the local schedule is active, nciSetpoints can also be changed from the front panel of the
thermostat. The fields specify the setpoint temperature for heating and cooling modes and effective occupancy
(Occ, Standby, or UnOcc).
CoolUnoccSpt NciSetpoints specify the scheduled space temperature setpoint for various operating modes and effective
occupancy. Setpoints may be changed during day-to-day operation of the node by a networked operator
interface. When the local schedule is active, nciSetpoints can also be changed from the front panel of the
thermostat. The fields specify the setpoint temperature for heating and cooling modes and effective occupancy
(Occ, Standby, or UnOcc).
Table A2. Configuration Points (Right).

Installer parameter has a 0 state; True
Economizer.
Comments

Installer parameter has a 1 state. 0
25

Time-of-day;
(continued)
63-4366