Honeywell Q7300H System Integration Manual page 15

Q7300H COMMUNICATING SUBBASE SYSTEM INTEGRATION USER ADDRESS MANUAL
User Address
tCool1 Equipment output relay
tCool2 Equipment output relay
tCool3 Equipment output relay
tCoolSetPt Cooling setpoint used by the thermostat to automatically select heating and cooling and to control space
temperature. tCoolSetPt is displayed when the thermostat is calling for cooling. See the section on Space
Temperature Setpoint for more details.
tCurrentOcc Occupancy state called for by the thermostat time-of-day schedule; Occ, UnOcc, Null.
tDateCodeMo Future use.
tDateCodeYr Future use.
tEconOn Equipment output relay
tEEPROMid Future use.
tEffectOcc Occupancy state called for by the thermostat including the local scheduler activation of Temporary Occupied or
Continuous Occupied buttons; Occ, UnOcc.
tEmergHeat User Mode Switch–EmergHeat setting. True = selected; False = not selected.
NOTE:
tEmHeat1 Equipment output relay (Emergency Heat stage 1). True = On; False = Off.
Table A1. Miscellaneous (Right Continued).

Cool Stage 1. True = On; False = Off.

Cool Stage 2. True = On; False = Off.

Cool Stage 3. True = On; False = Off.

Economizer. True = On; False = Off.
Only one User Mode Switch may be True at a time.
15
Comments
(continued)
63-4366