Honeywell Q7300H System Integration Manual page 41

Q7300H COMMUNICATING SUBBASE SYSTEM INTEGRATION USER ADDRESS MANUAL
User Address
AlarmNode The LonWorks
AlarmSubnet The LonWorks
AlarmLog1 The last five alarm reports sent via nvoAlarm are reported via nvoAlarmLog. When AlarmNotifyDisabled is
entered into the log, further alarms or return to normal are not entered into the log until alarm reporting is again
enabled. If nvoAlarm is bound and not acknowledged, the last alarm report entered into nvoAlarmLog is the
one that was not acknowledged. AlarmLog1 is the newest alarm and AlarmLog5 is the oldest. When a new
entry is made to the log, the oldest entry is lost.
AlarmLog2 The last five alarm reports sent via nvoAlarm are reported via nvoAlarmLog. When AlarmNotifyDisabled is
entered into the log, further alarms or return to normal are not entered into the log until alarm reporting is again
enabled. If nvoAlarm is bound and not acknowledged, the last alarm report entered into nvoAlarmLog is the
one that was not acknowledged. AlarmLog1 is the newest alarm and AlarmLog5 is the oldest. When a new
entry is made to the log, the oldest entry is lost.
AlarmLog3 The last five alarm reports sent via nvoAlarm are reported via nvoAlarmLog. When AlarmNotifyDisabled is
entered into the log, further alarms or return to normal are not entered into the log until alarm reporting is again
enabled. If nvoAlarm is bound and not acknowledged, the last alarm report entered into nvoAlarmLog is the
one that was not acknowledged. AlarmLog1 is the newest alarm and AlarmLog5 is the oldest. When a new
entry is made to the log, the oldest entry is lost.
AlarmLog4 The last five alarm reports sent via nvoAlarm are reported via nvoAlarmLog. When AlarmNotifyDisabled is
entered into the log, further alarms or return to normal are not entered into the log until alarm reporting is again
enabled. If nvoAlarm is bound and not acknowledged, the last alarm report entered into nvoAlarmLog is the
one that was not acknowledged. AlarmLog1 is the newest alarm and AlarmLog5 is the oldest. When a new
entry is made to the log, the oldest entry is lost.
AlarmLog5 The last five alarm reports sent via nvoAlarm are reported via nvoAlarmLog. When AlarmNotifyDisabled is
entered into the log, further alarms or return to normal are not entered into the log until alarm reporting is again
enabled. If nvoAlarm is bound and not acknowledged, the last alarm report entered into nvoAlarmLog is the
one that was not acknowledged. AlarmLog1 is the newest alarm and AlarmLog5 is the oldest. When a new
entry is made to the log, the oldest entry is lost.
AlarmNotifiyDisable When alarm reporting is suppressed, this bit is set to one indicating that alarm reporting is disabled. If this bit is
zero, alarm reporting is enabled.
Table A4. Alarm Points (Right).
]
node number (in domain entry 1 of the nodes domain table).
]
subnet number (in domain entry 1 of the node's domain table).
41
Comments
(continued)
63-4366