SERVICING YOUR OUTBOARD MOTOR
GEAR CASE OIL CHANGE
Recommended oil : API standard (GL-4/5)
SAE 90 outboard motor gear oil
Oil Capacity
: 0.24 US qt (0.23 S, 0.20 lmp qt)
Remove the oil level screw and drain screw and allow the gear oil to thoroughly
drain into a suitable container.
Pump or squeeze the recommended gear oil through the OIL DRAIN screw
hole until oil starts flowing out through the OIL LEVEL screw hole.
Use new sealing washers. Install the oil level screw first and then the oil drain
screw. Tighten securely.
OIL LEVEL SCREW
OIL DRAIN SCREW
52