Gear Case Oil Change - Honda BF2D Owner's Manual

Gear Case Oil Change

Change the gear case oil with the
engine stopped and the outboard
motor in the vertical position.
GEAR OIL
LEVEL SCREW
GEAR OIL DRAIN/
FILL SCREW
1. Place a suitable container below
the oil drain hole to catch the used
oil, then remove the oil level screw
and oil drain/fill screw.
SERVICING YOUR OUTBOARD MOTOR
2. Allow the used oil to drain
completely, then install an oil
pump adapter in the oil drain hole.
If water or contaminated (milky-
colored) oil flows out the drain
hole when the screw is removed,
have the outboard motor checked
by an authorized Honda Marine
dealer.
GEAR OIL BOTTLE
Improper disposal of gear case oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down
the drain.
3. Add oil through the oil drain hole
until it flows out the oil level hole,
then install the oil level screw.
Remove the pump adapter and
install the oil drain/fill screw.
GEAR OIL CAPACITY:
0.05 US qt (0.05 L)
Outboard motor SAE 90 hypoid
gear oil API Service category (GL-
4)
OIL LEVEL PLUG TORQUE:
2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
Avoid losing more than 1 fl oz (30
3
cm ) while reinstalling the drain/
fill screw.
OIL DRAIN PLUG TORQUE:
2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
43