Section 4: Operations; Operation Safety; Basic Controls - Grizzly G0654 Owner's Manual

SEcTION 4: OpERATIONS

Operation Safety

To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLy REcOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-24-
manual BEfORE

Basic controls

this section covers the basic controls used during
routine operations.
START Button: starts motor.
STOp paddle: stops motor when pushed in.
outfeed
handwheel
stop
paddle
figure 35. start/stop controls.
Table Movement: to move the infeed or outfeed
tables, loosen the table locks (see figure 36),
move the tables with the infeed adjustment lever
or outfeed hand wheel (see figure 35), then tight-
en the table locks. the depth stop knob locks the
cutting depth at ⁄ ". to disengage the stop knob,
1
8
pull it out and move the infeed table up or down.
infeed
table lock
depth stop Knob
figure 36. table control locations.
Model G0654 (Mfg. Since 9/07)
infeed
adjustment
lever
start
Button
outfeed table lock