Blade Speed - Grizzly G0640X Owner's Manual

Blade Speed

Figure 39.
To change the V-belt positions:
1.
2.
3.
4. Figure 40
Figure 40.
5.
6.
Figure 41
Note: If one belt is used more than the other
belt, it will stretch slightly under normal condi-
tions. This means that one belt may be looser
than then other when both belts are installed.
This is normal. Overtightening one belt in
attempt to tighten the other will decrease the
lifespan of the bearings in the pulleys.
Figure 41.
7.
8.