Grizzly G0640X Owner's Manual page 26

Note: For a quick gauge, fold a dollar bill in half
twice (four thicknesses of a dollar bill is approxi-
mately 0.016") and place it between the support
bearing and the blade as shown in Figure 26
Figure 26.
7.
To adjust the lower support bearings:
1.
2.
3.
Figure 27.
Figure 27
4.
Note: The table must be re-aligned with the
blade if the trunnion assembly is moved.
Refer to Page 25.
5.
6.
Figure 25
26)
7.
Adjusting Positive
Stop
To set the positive stop 90° to the blade:
1.
Blade Tensioning
Page 21
2.
Figure