Part 8 - Video Search And Playback; Part 9 - Video Backup; File List - Q-See QS206 Quick Installation Manual

PART 8 - VIDEO SEARCH AND PLAYBACK

In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow
play at 1/2x, 1/4x, and 1/8x, or normal play, pause and play frame by frame using the
playback control bar, and adjust volume by clicking or sliding tune control bar. When
playback has finished, system will return to previous menu.

File List:

On the Search Menu click the Search button then click File list to display the sub-menu
shown in the picture below.
This option will allow you to view all of the available files by channel and type (all,
normal, or alarm).
You can click on a file to playback the file.
Video Search:
From the Main Menu select SEARCH to
display the Video Search Menu shown to
the right. If you input a specific date and
click Search, you will find all the recordings
for that day. When you select an item, you
will playback the recordings in 16 channel
mode; or, click [File list] button to display
File list interface, where you can playback
or backup the file you selected. See File
List heading below.
Use the buttons on the side panel to
navigate the file list:
FIRST: Jump to the first page of the
list
PRE: Turn to the previous page
NEXT: Turn to the next page
LAST: Jump to the last page of the
list
ALL: Select all files
OTHER: Clear all files
BACKUP: After selecting a file(s), click
to begin copying the data to a USB
flash drive (not included)

PART 9 - VIDEO BACKUP

Attach a USB flash drive or USB hard drive to the USB backup port and follow the instruc-
tions in Part 9 to go to the File List in the Search menu.
If you want to backup a single recorded file from the file list, from the File List dialog box
pictured above, select the file you wish to back up by placing a check mark in the BAK
box and hit the [BACKUP] button on bottom of the screen. You will then receive a pop up
screen as illustrated below showing you the progression of your backup. Once backup is
complete, you will then receive a pop up message informing you that you have backed up
your files successfully. Note that all files will be in an H264 format that can be converted
to AVI using the playback software that comes with the DVR or through the remote viewer
program. Once converted, you can then view these files through any program that sup-
ports an AVI format.