Menu Lock; Video Search; Multiple Channel Display; Ptz Control - Q-See QC-SERIES User Manual

5.3: Menu Lock

(Picture 67)

5.4: Video Search

Right clicking on your mouse and clicking on the Video Search option from your pop-up menu will allow you to search
through your recorded files and playback recordings. For more information on searching through files, refer to
Section 5.24.

5.5: Multiple Channel Display

You can view your video in a variety of play modes including Single Channel Display, PIP Display, Dwell Time Display
and Multi Channel Display. In Multiple Channel Display mode, you can choose from a predetermined range of
Channels to display including the following:
First Quad: Allows you to display (CH1-CH4)
Second Quad: Allows you to display (CH5-CH8)
Third Quad: Allows you to display (CH9-CH12)
Fourth Quad: Allows you to display (CH13-CH16)
First Nine CHs: Allows you to display (CH1-CH9)
Second Nine CHs: Allows you to display (CH10-CH16)
Sixteen CHs: Allows you to display (CH1-CH16)

5.6: PTZ Control

As dicussed in Section 5.2.7.4, you have the ability to connect a PTZ camera to your DVR system. To operate the
PTZ camera once you have connected it to your system and configured it correctly following the directions in 5.2.7.4,
you will need to access the PTZ Camera interface illustrated in Picture 69. To do this, right click on your mouse and
click on the PTZ option from your pop-up menu. From the PTZ Camera interface, you can Zoom in and out, adjust the
camera Focus and increase or decrease the brightness of your image. Click Z+&Z- keys to zoom In or out, click
F+&F- keys to control camera focus and click I+&I- to adjust the brightness.
Cruise Setup
Open the auto cruise function on the PTZ setting menu to configure your auto cruise settings as illustrated in Pictures
68 and 69. The functions associated with each of the buttons on the Cruise Setup interface are as follows:
Your DVR is equipped with a Menu Lock feature to ensure that your settings and
configurations are tamper-proof. Right clicking on your mouse and clicking on
[Menu] the [Lock] from the pop up menu will lock your DVR and you will be
required to enter a password to unlock this feature as illustrated in Picture 67).
Please note that only the System Administrator has full access and authority
over Main Menu operations.
30
QSDR16RTCB User Manual