Starting The Dvr; System Initialization; Main Interface Screen; Troubleshooting - Q-See QSDR74RTS User Manual

STARTING THE DVR

SYSTEM INITIALIZATION

1. After connecting the power adapter, turn on the power button
2. The system will boot-up and launch a "System Initializing" message, as shown in
.
IMAGE 1
IMAGE 1

MAIN INTERFACE SCREEN

Once the system initialization process is complete, the system will enter the main interface
screen (as shown in ).
IMAGE 2

TROUBLESHOOTING

14
IMAGE 2

Video Loss:

If the system does not detect a video input, you will receive a "Video Loss" message for each
camera as depicted in . Once the cameras have been connected, the Main Interface
IMAGE 3
screen will display a live feed from each camera in its respective box as shown in

Alarm Sounds:

If the first box on the Main Interface screen displays an "H" and an alarm sounds, the DVR
does not detect a HDD. To turn the alarm off, navigate to [Device Management, Alarm setting].
Choose the "off" option next to "HDD loss, HDD space not enough and alarm output". Return
to the section on installing the DVR and ensure the HDD is installed correctly.

CHANGE TO FULL SCREEN VIEW

To change to a full screen view on one of the cameras, from the Main Interface screen, posi-
tion the mouse over an image and double-click, as shown in
Double-click again to return to the multi-camera view (
IMAGE 3
.
IMAGE 2
.
IMAGE 4
).
IMAGE 3
IMAGE 4
15