Ptz (Pan, Tilt, Zoom) Control - Q-See QSC26404 User Manual

Step 3: Input new password
Use numeric keys to input new password. The password can be blank. It also
can be 16 numbers. Press【ENTER】to exit edit box, and move to "Verify" item to
verify password.
Note: In edit box, use 【】 / 【 】 to move cursor and 【EDIT】 key to delete
the number in front of the cursor.
Step 4: Password modified successfully
Move the "Active Frame" to "Confirm" button, press【ENTER】key. If the
password is modified successfully, you will return to the main menu, if not, an error
dialog box will pop up. You can repeat step 3 to try again.
4.4

PTZ (Pan, Tilt, Zoom) Control

Note: The user must have "PTZ control" rights.
PTZ Control Interface
In preview mode, press the【PTZ】key, in the login dialog box, select one user
name and input the correct password, you will enter into PTZ control interface.
In menu mode, press 【 PTZ】 key, you can enter into PTZ control interface directly,
shown in the following picture:
QSC26404 User's Manual
Fig 4.7 PTZ Control interface
22