Table of Contents
Advertisement
SOURCE MENU
SOURCE MENU
.._ ANT/CABLEt
ANT/CABLE2
VIDEO 1
VIDEO 2
S-VIDEO 1
_SOURCE
MENU_
ANT/CABLE1
ANT/CABLE2
VIDEO 1
VIDEO 2
S-VIDEO t
VIDEO 3
S-VIDEO 2
Source Menu
Source Menu for TVs with Front Jacks
TO SELECT
A SOURCE
PURPOSE
The SOURCE
MENU is used to specify the equipment
that is being used to supply the video and audio signals.
You select the source you want by selecting the SOURCE
MENU. It shows the possible sources available for your
viewing selection.
To Access the SOURCE MENU Directly
1. Press SOURCE on the remote control to bring up the
SOURCE MENU.
2. Press SOURCE repeatedly until the source you want is
highlighted.
3. Press ENTER to return to normal viewing.
To Access the SOURCE MENU Indirectly
1. Press MENU until the SOURCE Menu is displayed.
2. Press SELECT Up/Down until the desired source is
highlighted.
3. Press ENTER
to return to normal viewing.
SOURCE IDENTIFICATION
The Channel/Time display is used to
determine
the type of
input source currently being viewed. To see the Channe!/
Time display, press ENTER. If an antenna or cable-TV
source is being viewed, the Chaune!/Time display is shown in
the Channel Number/Time format. If a Video source is being
viewed, the Channe!/Time display is shown in the Video/Time
format.
NOTE: The sources are identified by color in both the on-
screen displays and on the connection
center on the back of
the TV. The color for the Channel/Time display, Volume
and Muted display will match the color or the source you
are watching. The color will also help to identify which
source you are watching when viewing PIP. The colors are
as follows:
SOURCE
COLOR
ANT/CABLE 1 .......................
RED
ANT/CABLE 2 .......................
BLUE
VIDEO 1 ............................
MAGENTA
VIDEO 2 ............................
LT. BLUE
S-VIDEO 1 ..........................
GREEN
VIDEO 3 ............................
YELLOW
S-VIDEO 2 ..........................
WHITE
SOURCE EQUIPMENT CONNECTIONS
The actual source selected for viewing on your TV depends
on how the TV is connected
to external equipment.
Selecting ANT/CABLE 1 or 2 from SOURCE Menu:
Routes the ANTENNA
or cable-TV source to the TV for
viewing. You see program material from whichever signal
source is connected
to the ANT/CABLE
jack. Usually the
antenna is connected to the ANTENNA jack. In cable ap-
plications, the output from a cable-TV decoder is con-
nected to this jack. For VCR application, the ANT OUT
from the VCR is connected to this jack.
Selecting VIDEO 1 or 2 from SOURCE Menu: Routes the
auxiliary video source (such as a VCR or a Video Disc
player) to the TV for viewing. The video source must be
connected to the corresponding
VIDEO 1/2 jacks.
Selecting S-VIDEO 1: Routes the auxiliary Super-VHS
VCR Source to the TV for viewing. The Super-VHS VCR
must be connected
to the corresponding
input jacks.
Selecting VIDEO 3 from SOURCE Menu: Routes the front
video source (such as a camcorder, VCR or a Video Disc
player) to the TV for viewing. The video source must be
connected
to the corresponding VIDEO 3 jacks.
Selecting S-VIDEO 2: Routes the front Super-VHS VCR
source to the TV for viewing. The Super-VHS VCR must
be connected to the corresponding
S-VIDEO 2 input jacks.
25s0
7 - 1
Advertisement
Table of Contents
