Step 2. Make Vcr Connections To 'Iv - Zenith SL2784BT Operating Manual And Warranty

CONNECTIONS FOR YOUR TV
STEP 2. MAKE VCR CONNECTIONS TO TV
STEREO VCR
Connections:
You must make the following connections to
obtain stereo sound from your TV while playing a stereo
video tape.
1. Connect the VCR RIGHT/LEFT AUDIO OUT-
PUT into the VIDEO 1 IN RIGHT and LEFT audio
jacks on the TV.
2. Connect VCR VIDEO OUTPUT into the VIDEO
I IN VIDEO jack on TV.
Operation: To use these VCR connections, VIDEO I must
b¢ se.lected from the SOURCE IVfENU. To select this source.,
refer t¢ _h¢ SOURCE MENU section of this booklet. For im-
proved picture quality, place VCR/TV switch on your VCR in
the VCR po.ddon.
STEREO VCR
I, ourP_s 1
g 'tUmO L I I
r
©
MONAURAL VCR
Connections:
1. To get monaural sound from both TV speakers, use
a Y-adapter audio cable (customer supplied) to
route VCR AUDIO OUT to the VIDEO 1 IN
RIGHT and LEFT audio jacks on the TV.
2. Connect VCR VIDEO OUTPUT into the VIDEO
1 IN VIDEO jack on TV.
MONAURAL VCR
I, I
mm
_<_ 1 - 4